So, you’ve been wondering how to replace a door? Or have you been thinking about doing it for a while, yet keep putting it off?
Fortunately, it’s not as difficult as it sounds, even for the novices. The key points you need to cover are sourcing high-quality internal or external doors and then taking on the practices of removing and replacing the door.
Let’s break down everything you should know.
How to remove a door
Before considering how to replace a door, you’ll need to know how to remove one.
You’ll want to gather the tools, which typically consist of a screwdriver, hammer, and utility knife.
Have a look at the door and check where the hinges are. You'll find pins securing the door to the frame. Place the tip of your screwdriver at the bottom of the hinge pin, gently tap the handle with your hammer, and push the pin upwards. Once loosened, you can pull it out completely.
You can now remove the door from its frame. It can be handy to have someone help you with this, particularly if it’s a heavy hardwood door.
How to replace a door frame
In some situations, you’ll be looking to replace your existing door frame. It may seem intimidating and probably the last thing you want to think about when considering how to replace a door. But with the right tools and guidance, you’ll be just fine.
You will need to remove the existing frame using a pry bar and hammer, carefully getting rid of any nails or screws.
Measure the doorway. The new frame should match these dimensions, allowing for slight adjustments to guarantee a snug fit.
With your new frame, secure the sill at the bottom of the doorway, and always use a spirit level to keep it flush.
Attach the side jambs next. Fix them in place with screws or nails, checking alignment as you go.
A well-fitted frame is the foundation of a properly functioning door, so take time with this.
How to replace a door
To replace your door, you’ll need your tools. You can start by positioning the door in the open frame to mark where the hinges will go. Place the hinges at the correct height.
Chisel out shallow recesses for the hinges in the door edge and the frame. These recesses should be just deep enough for the hinges to sit flush against the wood.
Screw the hinges into the door, then align it back into the frame. Check that it swings freely without scraping the floor or the frame.
Sourcing a new door from MGM Timber
There you have it; you now know how to replace a door.
Still need to source your doors and accessories? At MGM Timber, we make sourcing new doors easy. We stock a large range of sizes, styles, and finishes to complement any home or commercial project.
We have everything from modern hardwood doors to laminate options, alongside a selection of door accessories.
All of our stock is available with quick delivery, too, shipped directly from our branches to your kerbside.